Advanced Heat Pump for SWIM SPAS

£1,950 (inc VAT)

48 x £56.09 p/month plus £50 deposit
Total Payable £2,742.32
19.90% APR Representative

Air Source Heat Pumps are the most efficient form of heating water in a Hot Tub.

  • Eco friendly refrigerant

  • Make your money back in power savings

  • Turns a 3KW heater into a 9KW heater

  • Free site survey

Site survey’s can be booked via email.

  • Electrical requirements – The heat pump does not need any additional electrical installation on site as the unit will take its power from the hot tub.
  • Planning – Each installation will vary, and we will undertake a site survey to review and discuss the best fitment and location for the heat pump. This survey is free of charge to our local clients and is a great opportunity to discuss the best option for the installation of the heat pump.
  • Installation – The heat pump can be installed up to a maximum of 10 metres from the hot tub and will need a solid level area to be placed on. Our standard pricing includes installation of approximately 500mm – 1000mm from the hot tub. Positioning the heat pump further than this may incur additional costs for materials and labour. Pipe lagging is not included but this can be added by the customer should they require. We would advise lagging of pipes for long distances of over 3 metres.
  • Fitment – We will undertake some basic modifications to your hot tub/swim spa to plumb the heat pump into the heating system. There will be an inlet and outlet pipe plumbed into the hot tub base/cabinet to provide circulation through the heat pump.
  • Location – The heat pump requires a minimum of 450mm of inlet space and is recommended to have a minimum of 1500mm of space for the fan outlet.
  • Size – The unit measures w 910 – d 355 – h 690mm (height with rubber feet).
  • Noise – Our heat pump is super quiet and has different modes that can make the unit an almost silent 20db when set in silent mode.
  • Inverter Technology – This model is an inverter heat pump. This means it will automatically vary its power output between 20 and 100% depending on the heating requirement. An inverter heat pump is more efficient and provides a higher CoP than an ON /OFF air source heat pump.
  • Operating range – The unit will operate with an ambient air temperature from as low as minus 10°c and will heat up the water up to 40°c.
  • Guarantee – 2 years on the unit’s components and 5 years on the titanium heat exchanger.


Performance Condition: Ambient Temperature: (DB/WB) 27˚C/24.3˚C;
Water Inlet/Outlet Temperature: 26˚C/28˚C.
Heating CapacitykW1.8-9.5
Consumed PowerkW0.124-1.46
Boost Mode Heating Capacity (kW)9.5
Smart Mode Heating Capacity (kW)7.8
Silent Mode Heating Capacity (kW)3.5
Performance Condition: Ambient Temperature: (DB/WB) 15˚C/12˚C;
Water Inlet Temperature: 26˚C.
Heating CapacitykW1.5-7.9
Consumed PowerkW0.194-1.491
Boost Mode Heating Capacity (kW)7.9
Smart Mode Heating Capacity (kW)6.1
Silent Mode Heating Capacity (kW)2.5
Operating Air Temperature˚C-10-43
Heating Temperature Range˚C5-40
Cooling Temperature Range˚C8-35
Power Supply220-240Hz-/50Hz
Advised Pool Volumem320-40
Max Power InputkW1.75
Max CurrentA7.95
Air Volumem3/h900
Sound PressuredB (A)33-46
Water Flow Volumem3/h4.1
Water Pressure DropkPa18
Water Pipe Connection (Inlet)mm50
Water Pipe Connection (Outlet)mm48.3
Net Dimensions (L)x(W)x(H)mm(910)x(335)x(620)
Net Weightkg37